Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
bordertrue


Column
width50%15px

РУС

Tip
iconfalse
titleОписание
Все публикуемые версии ПО EasyWRT являются стабильными.
К установке и использованию рекомендована крайняя выпущенная версия ПО.


Status
colourBlueGreen
titlelatest
- Крайняя версия
Status
colourGreenBlue
titlerelease
- Основной релиз, чаще всего выпускается в конце квартала
Status
subtletrue
colourBlue
titlehotfix
- Обновление релиза с доработками и/или исправлениями



Column
width50%20px

ENG

Tip
iconfalse
titleDescription
All published versions of EasyWRT software are stable.
The latest released version of the software is preferred for installation and use.


Status
colourBlueGreen
titlelatest
- Latest version
Status
colourGreenBlue
titlerelease
Major release, most often released at the end of the quarter
Status
subtletrue
colourBlue
titlehotfix
Updated release with improvements and/or corrections




Section
bordertrue


EasyWRT 2.5.

0

1
Status
subtletrue
colour

Green

Blue
title

release

hotfix
Status
colour

Yellow

Green
title

very soon

latest

2.5.1-2407121331-224bb8650
Column
width15

РУС

Expand
Excerpt
hiddentrue

Новое

  1. Добавлен функционал "Packet Manager" для установки необязательных, но проверенных и подготовленных пакетов приложений:
    1. DDNS;
    2. Wake on LAN;
    3. Wireguard клиент/сервер (предварительная версия) для решения корпоративных задач;
    4. OpenVPN клиент/сервер (предварительная версия) для решения корпоративных задач;
  2. Добавлено автоопределение роли роутера SNR при подключении в Mesh, документация дополнена;
  3. Для моделей SNR с LTE реализован механизм проверки и перезагрузки модема при зависании;
    Image Removed
  4. Для всех моделей актуального ряда роутеров SNR доступен сервис отправки статистики. Сервис позволяет добровольно активировать отправку диагностических данных на сервер ООО "НАГ". Отправленные данные помогут улучшить функциональность EasyWRT при разработке. Персональные данные не передаются.

Улучшения

  1. Улучшено логирование Mesh для контроллеров и агентов, сделано более "читаемым";
  2. Сервис EasyCustom дополнен новыми командами WIFI_SET_PMF_2GHZ/5GHZ и WIFI_SET_DW2GHZ/5GHZ. Документация дополнена.
  3. Улучшен механизм активации Mesh. После подачи питания роутеру, на котором был запущен режим Mesh-агента через кнопку Mesh/RST, но при активном таймере было прервано питание, Mesh перейдет в состояние "Отключено";
  4. Доработана логика передаваемых значений параметра LocalTimeZone ветки InternetGatewayDevice.Time.;
  5. Увеличено количество передаваемых параметров в ветке Internet­Gateway­Device.­LANDevice.­{i}.­WLANConfiguration.­{i}
  6. Увеличено количество данных, записываемых в диагностический архив с модели SNR LTE
  7. Добавлена кнопка для ручного перезапуска модема в SNR LTE
    Image Removed

Исправления

  1. Для моделей SNR AX2, ME2-Lite и MD2 исправлена ошибка пустой конфигурации Wi-Fi, возникающая при отключении питания сразу после активации Mesh кнопкой;
  2. Исправлена ошибка вывода поддерживаемых Wi-Fi стандартов при сканировании радиоэфира через ubus;
  3. Исправлена ошибка неправильного расположения элементов WEB UI на странице "Настройка WAN", возникающая при переходе со страницы на страницу;
  4. Исправлена ошибка работы драйвера Wi-Fi для моделей ME2-Lite, MD2, AX1, возникающая при работе Band Steering, приводящая к переключению клиента в другой диапазон;
  5. Исправлена критическая ошибка в работе ядра, возникающая при использовании MBSSID и гостевых сетей;
  6. Исправлена ошибка в работе DHCPv4-сервера, когда после его выключения/включения, сервер не отвечал на DHCP Discover;
  7. Исправлена ошибка в работе сервиса диагностики ping. При указании в поле ipv4 доменного имени, а не ipv4-адреса, выполнялся ping ipv6;
  8. Исправлена ошибка в параметрах LANDevice.1.LANEthernetInterfaceConfig для модели SNR AX2. Измененные значения принимались, но при чтении параметров возвращались неправильные значения;
  9. Исправлена ошибка конфигурации VPN-интерфейсов, когда при настройке интерфейса PPTP/L2TP, после смены типа VPN на PPPoE интерфейс не поднимался и маршрут по умолчанию строился через WAN;
  10. Исправлена ошибка, когда на SNR-CPE W4N (rev. N) отображался чекбокс включения Band Steering;
  11. Исправлены ошибки в работе multicast-трафика при одновременной нагрузке роутера другими клиентами устройствами, подключенными в соседних портах LAN-портах с согласованием 100 Мбит/с.;
  12. Исправлена ошибка, приводящая к переключению интерфейса 5 ГГц в MCS0 при активном multicast-потоке и дополнительной нагрузке трафиком.

...

Column
width20

ENG

New

Improvements

Fixes

...

Улучшения

  1. Повышена стабильность некоторых сервисов (rpcd, logd, igmpproxy).

  2. Расширен набор параметров для диагностического архива.

Исправления

  1. Исправления подключения клиентских устройств в режимах N/AC.
  2. Исправления обновления SNR AX2 в recovery режиме.
  3. Исправления в передаче данных некоторых служб в сервисе сбора статистики.
Expand
titleСlick here to expand...
Excerpt
hiddentrue



Column
width20

ENG

Expand
titleСlick here to expand...

Improvements

  1. Increased stability of some services (rpcd, logd, igmpproxy).
  2. Diagnostic archive data has been expanded

Fixes

  1. Fixed connection of wireless clients in only N/AC mode
  2. Fixed AX2 firmware update via recovery
  3. Fixed transfer of some services status to health service




Section
bordertrue


EasyWRT 2.5.0
Status
colourBlue
titlerelease

2.5.0-2406261236-8c31ab4cc
Column
width15

РУС

Expand

Новое

  1. Добавлено автоопределение роли роутера SNR при подключении в Mesh, документация дополнена;
  2. Для моделей роутеров SNR с поддержкой LTE реализован механизм проверки и перезагрузки модема при зависании;
    Image Added
  3. Внедрен сервис отправки статистики. Сервис позволяет  передавать диагностические данные о работе роутера с ПО EasyWRT на сервер ООО "НАГ". Отправленные данные помогут улучшить функциональность EasyWRT при разработке нового функционала или при доработке имеющегося. Сервис не затрагивает конфиденциальные данные, а его активация/деактивация опциональна.

Улучшения

  1. Улучшено логирование Mesh, сделано более "читаемым";
  2. Сервис EasyCustom дополнен новыми командами WIFI_SET_PMF_2GHZ/5GHZ и WIFI_SET_BW2GHZ/5GHZ. Соответствующая документация дополнена.
  3. Улучшен механизм активации Mesh. Если на роутере активирован Mesh-агент через кнопку Mesh/RST, но было прервано питание и не завершился таймер соединения, Mesh перейдет в состояние "Отключено";
  4. Доработана логика передаваемых значений параметра LocalTimeZone ветки InternetGatewayDevice.Time.;
  5. Увеличено количество передаваемых параметров в ветке Internet­Gateway­Device.­LANDevice.­{i}.­WLANConfiguration.­{i};
  6. Расширен набор параметров диагностики для SNR LTE в диагностическом архиве;
  7. Добавлена кнопка для ручного перезапуска модема в SNR LTE;
    Image Added

Исправления

  1. Для моделей SNR AX2, ME2-Lite и MD2 исправлена ошибка пустой конфигурации Wi-Fi, возникающая при отключении питания сразу после активации Mesh кнопкой;
  2. Исправлена ошибка вывода поддерживаемых Wi-Fi стандартов при сканировании радиоэфира через ubus;
  3. Исправлена ошибка неправильного расположения элементов WEB UI на странице "Настройка WAN", возникающая при переходе со страницы на страницу;
  4. Исправлена ошибка работы драйвера Wi-Fi для моделей ME2-Lite, MD2, AX1, возникающая при работе Band Steering, приводящая к переключению клиента в другой диапазон;
  5. Исправлена ошибка, возникающая при использовании MBSSID и гостевых сетей, приводящая к сбою в работе ядра;
  6. Исправлена ошибка в работе DHCPv4-сервера, когда после его выключения/включения, сервер не отвечал на DHCP Discover;
  7. Исправлена ошибка в работе сервиса диагностики ping. При указании в поле ipv4 доменного имени, а не ipv4-адреса, выполнялся ping ipv6;
  8. Исправлена ошибка в параметрах LANDevice.1.LANEthernetInterfaceConfig для модели SNR AX2. Измененные значения принимались, но при чтении параметров возвращались неправильные значения;
  9. Исправлена ошибка конфигурации VPN-интерфейсов, когда при настройке интерфейса PPTP/L2TP, после смены типа VPN на PPPoE интерфейс не поднимался и маршрут по умолчанию строился через WAN;
  10. Исправлена ошибка, когда на SNR-CPE W4N (rev. N) отображался чекбокс включения Band Steering;
  11. Исправлены ошибки в работе multicast-трафика при одновременной нагрузке роутера другими клиентами устройствами, подключенными в соседних портах LAN-портах с согласованием 100 Мбит/с.;
  12. Исправлена ошибка, приводящая к переключению интерфейса 5 ГГц в MCS0 при активном multicast-потоке и дополнительной нагрузке трафиком.



Column
width20

ENG

Expand
titleСlick here to expand...

New

  1. Added automatic detection of the role of the SNRrouterwhenconnected to theMesh, the documentation has been updated;
  2. ForLTE-enabledSNRroutermodels, a mechanism is implemented to checkandreboot the modemwhen it freezes;
    Image Added
  3. A service for sending statistics "Health service" has been introduced. The service allows you to transfer diagnostic data about the operation of the router from the EasyWRT software to the NAG LLC server. The data sent will help improve the functionality of EasyWRT when developing new functionality or when refining existing ones. The service does not affect confidential data, and its activation/deactivation is optional.

Improvements

  1. ImprovedMeshlogging,mademore"readable";
  2. The EasyCustom servicehas been supplemented with newcommandsWIFI_SET_PMF_2GHZ/5GHZandWIFI_SET_BW2GHZ/5GHZ. The relevantdocumentation has been updated;
  3. The Meshactivationmechanism has been improved.If the Meshagent is activatedon the routervia the Mesh/RSTbutton,but the powerwasinterruptedand the connectiontimer did notend, the Mesh will switchtothe"Disconnected" state;
  4. Thelogic of the transmittedvalues of the localTimeZone parameterof the InternetGatewayDevice.Timebranch has been improved; The number of transmittedparametersin the InternetGatewayDevice.LANDevice branch has been increased .{i}.WLANConfiguration.{i};
  5. Expanded the set of diagnosticparametersforLTESNRin the diagnosticarchive;
  6. Added a buttonformanuallyrestarting the modeminSNRLTE;
    Image Added

Fixes

  1. For the SNR AX2, ME2-Lite and MD2 models, an empty Wi-Fi configuration error has been fixed, which occurs when the power is turned off immediately after activating the Mesh button;
  2. Fixed the error of displaying supported Wi-Fi standards when scanning the radio broadcast via ubus;
  3. Fixed an error of incorrect location of WEB UI elements on the WAN Setup page that occurs when switching from page to page;
  4. Fixed a Wi-Fi driver error for ME2-Lite, MD2, AX1 models that occurs when Band Steering is running, leading to the client switching to another range;
  5. Fixed a bug that occurs when using MBSSID and guest networks, causing the kernel to malfunction;
  6. Fixed an error in the operation of the DHCPv4 server when, after it was turned off/on, the server did not respond to DHCP Discover;
  7. Fixed an error in the ping diagnostic service. When specifying the domain name in the ipv4 field, and not the ipv4 address, ipv6 ping was performed;
  8. Fixed a bug in the LANDevice parameters.1.LANEthernetInterfaceConfig for the SNR AX2 model. The changed values were accepted, but incorrect values were returned when reading the parameters;
  9. Fixed a VPN interface configuration error when, when configuring the PPTP/L2TP interface, after changing the VPN type to PPPoE, the interface did not rise and the default route was built via WAN;
  10. Fixed a bug when on SNR-CPE W4N (rev. N) the checkbox for enabling Band Steering was displayed;
  11. Fixed errors in the operation of multicast traffic when the router is simultaneously loaded by other clients with devices connected in neighboring LAN ports with 100 Mbit/s agreement.
  12. Fixed an error that leads to switching the 5 GHz interface to MCS0 with an active multicast stream and additional traffic load.




title

Section
bordertrue


EasyWRT 2.4.5 
Status
subtletrue
colourBlue
titlehotfix

Status
colourBlue
latest

 

2.4.5-2406031434-11a16bc70
Column
width15

РУС

Expand

Исправления

Исправлена ошибка отображения подключенных LAN клиентов в арендах DHCP



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

Fixed issue with displaying connected LAN clients in DHCP leases



...

Section
bordertrue


EasyWRT 2.4.4 
Status
subtletrue
colourBlue
titlehotfix

2.4.4-2405161959-516b6f54
Column
width15

РУС

Expand

Исправления

  1. Скорректированы функции проверки лицензий ПО



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Adjusted software license verification functions



...

Section
bordertrue


EasyWRT 2.4.3 
Status
subtletrue
colourBlue
titlehotfix

 

2.4.3-2405141628-01bbfc41
Column
width15

РУС

Expand

Исправления

  1. Исправлена проверка контрольной суммы при обновлении прошивки
  2. Исправлены ошибки в bandsteering, вызванные одновременным включением bandsteering и активацией mesh. Повышена стабильность



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Checksum verification has been fixed during firmware update.

  2. Errors in bandsteering caused by simultaneous activation of bandsteering and mesh have been fixed. Stability has been improved



...

Section
bordertrue


EasyWRT 2.4.2
Status
subtletrue
colourBlue
titlehotfix

2.4.2-2404021753-8b12064f
Column
width15

РУС

Expand

Исправления

  1. Мелкие исправления в работе Mesh и сервиса автоматического обновления ПО



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Minor fixes in Mesh operation and software update service



...

Section
bordertrue


EasyWRT 2.4.1
Status
subtletrue
colourBlue
titlehotfix

 

2.4.1-2403291019-12fb0786
Column
width15

РУС

Expand

Исправления

  1. Исправлена ошибка, которая приводила к сбою элементов WEB UI



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Fixed a bug that caused WEB UI elements to crash




Section
bordertrue


EasyWRT 2.4.0
Status
colour

Green

Blue
titlerelease

 

2.4.0-2403251016-0402b275
Column
width15

РУС

Expand

Новое

  1. Добавлена функция Failover для модели SNR LTE - Документация

  2. Добавлена функция объединения сетей и поддержка управления диапазоном (Band Steering) - Документация
  3. Сервис централизованного обновления сети в Mesh - Документация
  4. Для операторов связи реализована система быстрой кастомизации ПО - "EasyCustom". Для получения подробной консультации и документации обратитесь к вашему менеджеру;
  5. В меню настроек VLAN добавлена поддержка 802.1p (кроме моделей W4N, MD2):

Улучшения

  1. Добавлено отображение поддержки 802.11k/v/r со стороны клиента в списке активных подключений: 
  2. Скорректировали логику поведения Mesh-агента при подключении к контроллеру: Клиенты подключенные к Mesh-агенту в процессе подключения к контроллеру будут отключены от роутера;
  3. Скорректировали механизм активации режима Mesh-агента: Если в течении двух минут соединение агента с контроллером не было установлено, то режим агента на маршрутизаторе будет отключен;
  4. Скорректирована функция определения типа подключения клиента в арендах DHCP;
  5. Добавлена возможность записи и хранения системного журнала в ПЗУ:
  6. Добавлена возможность отключения LAN интерфейсов из WEB UI;
  7. Расширен набор параметров для cwmp (TR-069/098):
     - AssociatedDevice.{i}.
     - LANEthernetInterfaceConfig.{i}.Stats.
     - InternetGatewayDevice.Services.SSHRemoteManagement.
     - InternetGatewayDevice.Services.WebRemoteManagement.
     - InternetGatewayDevice.Layer3Forwarding.Forwarding.
     - WANPPPConnection.­{i}.X_SNR_ConnectionInitializationTime.
     - WANIPConnection.{i}.X_SNR_ConnectionInitializationTime.
     - InternetGatewayDevice.TraceRouteDiagnostics.RouteHops.
     - InternetGatewayDevice.DownloadDiagnostics.
  8. Облегчена страница управления UDP-proxy, выведена статистика по подключениям:
  9. Переработали страницу управления гостевыми сетями. Выбор интерфейсов стал понятнее:
  10. Улучшено определение статуса подключения Mesh на контроллере.

Исправления

  1. Выполнено обновление драйверов (исправлены ошибки в обработке beacon frame, внутренних служб, WPA3, закрыты уязвимости в WPS);
  2. Исправлена ошибка запуска утилиты switch для моделей W4N, MD2;
  3. Исправлен обработчик паролей вводимых для режимов AP-Cli / Router;
  4. Исправлена функция отображения подключенных клиентов к Mesh-контроллеру/агенту по ethernet;
  5. Исправлена работа автоматического выбора канала;
  6. Исправлены ошибки в Mesh и его компонентах, повышена стабильность работы;
  7. Исправлены мелкие ошибки при генерации архива с конфигурацией;
  8. Исправлены ошибки при создании MBSSID для новых моделей маршрутизаторов;
  9. Исправлены ошибки в работе ALG для PPTP/RTSP/FTP и др.;
  10. Мелкие исправления WEB UI.




Column
width20

ENG

Expand
titleСlick here to expand...

New

  1. Added Failover function for the SNR LTE model - Documentation

  2. Added network aggregation function and support for band steering - Documentation
  3. Centralized network update service enabled in Mesh - Documentation
  4. A system for quick software customization - "EasyCustom" - has been implemented for telecom operators. For detailed advice and documentation, contact your manager;
  5. Added support for 802.1p to the VLAN settings menu (except W4N, MD2 models
    )

Improvements

  1. Added display of 802.11k/v/r support on the client side in the list of active connections
  2. Adjusted the logic of the Mesh agent’s behavior when connecting to the controller: Clients connected to the Mesh agent will be disconnected from the router while connecting to the controller;
  3. The mechanism for activating the Mesh agent mode has been adjusted: If within two minutes the connection between the agent and the controller has not been established, then the agent mode on the router will be disabled;
  4. The function of determining the client connection type in DHCP leases has been adjusted;
  5. Added the ability to record and store the system log in ROM (not recommended unless absolutely necessary):
  6. Added the ability to disable LAN interfaces from WEB UI;
  7. Expanded set of parameters for cwmp (TR-069/098):
     - AssociatedDevice.{i}.
     - LANEthernetInterfaceConfig.{i}.Stats.
     - InternetGatewayDevice.Services.SSHRemoteManagement.
     - InternetGatewayDevice.Services.WebRemoteManagement.
     - InternetGatewayDevice.Layer3Forwarding.Forwarding.
     - WANPPPConnection.­{i}.X_SNR_ConnectionInitializationTime.
     - WANIPConnection.{i}.X_SNR_ConnectionInitializationTime.
     - InternetGatewayDevice.TraceRouteDiagnostics.RouteHops.
     - InternetGatewayDevice.DownloadDiagnostics.
  8. The UDP-proxy management page has been simplified, connection statistics have been displayed:
  9. Reworked the page for managing guest networks. The choice of interfaces has become clearer:
  10. Improved detection of Mesh connection status on the controller.

Fixes

  1. Drivers have been updated (fixed errors in processing beacon frame, internal services, WPA3, vulnerabilities in WPS have been closed);
  2. Fixed an error in launching the switch utility for W4N, MD2 models;
  3. Fixed password handler for AP-Cli / Router modes;
  4. Fixed the function displaying connected clients to the Mesh controller/agent via ethernet;
  5. Fixed automatic channel selection;
  6. Errors in Mesh and its components have been fixed, stability has been improved;
  7. Fixed minor errors in generating configuration archive;
  8. Fixed errors in creating MBSSID for new router models;
  9. Fixed errors in ALG operation for PPTP/RTSP/FTP, etc.;
  10. Minor fixes in WEB UI.



...

Section
bordertrue


EasyWRT 2.3.2
Status
subtletrue
colourBlue
titlehotfix

 

2.3.2-2401251428-8f17f1ca
Column
width15

РУС

Expand

Исправления

  • Исправлена неработающая опция отключения для igmpproxy
  • Исправлен неправильно работающий переключатель для запуска авто обновления ПО
  • Исправлена проблема с присвоением zeroconf ip адреса при перезагрузках



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Fixed non-working disable option for igmpproxy
  • Fixed an incorrectly working switch for running auto software updates
  • Fixed the problem with assigning a zeroconf IP address during reboots



...

Section
bordertrue


EasyWRT 2.3.1
Status
subtletrue
colourBlue
titlehotfix

 

2.3.1-2312271431-4031ad24f
Column
width15

РУС

Expand

Исправления

  • Небольшие исправления в построении маршрутов в конфигурации Dual-Access (WAN+VPN)

  • Исправлен формат времени на странице контроля доступа

Улучшения

  • Журнал ядра теперь отображает подсветку (в CLI) и время логирования



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Minor fixes when creating routes in a dual access configuration (WAN+VPN)

  • Fixed time format on the access control page

Improvements

  • The kernel log now displays highlighting (in CLI) and logging time




Section
bordertrue


EasyWRT 2.3.0 
Status
colour

Green

Blue
titlerelease

2.3.0-2312221340-eb284d48d
Column
width15

РУС

Expand

Новое

  • Добавлено управление ограничениями доступа к роутеру со стороны WAN по подсетям (Меню - Система - Управление)
  • Добавлена функция детектирования петель для моделей ME2-Lite, AX1, AX2 (Меню - Сервисы - Разное)
  • Добавлены функции защиты от bruteforce атак в WEB UI/SSH (по умолчанию включено)

  • Добавлен вывод списка сессий для UDP-proxy

  • Добавлена поддержка tr-069 stun

  • Для PPPoE добавлены параметры AC и Service Name

Улучшения

  • Расширен набор параметров(добавили проброс портов) переносимых при миграции с прошивки SNR-CPE на EasyWRT. Полный перечень параметров доступен тут https://nag.wiki/pages/viewpage.action?pageId=32245989
  • Скорректирован сервис авто обновления ПО (актуально для очень медленных тарифов)
  • Скорректирована логика управления HWNAT (AX1, ME2-Lite)
  • Скорректирована логика переключения WPS режимов
  • Скорректировано поведение igmpproxy при смене WAN
  • Скорректирована логика отправки TransferComplete в cwmp после выполнения Download
  • Опция boguspriv по умолчанию отключена (по многочисленным просьбам)
  • Опция rfc1918_filter по умолчанию отключена (по многочисленным просьбам)

Исправления

  • Исправлены ошибки для режимов Ap-Cli с открытым шифрованием

  • Исправлены некоторые ошибки в Mesh (p1905), повышена стабильность

  • Исправлены ошибки в WEB UI по различным сервисам



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added control of access restrictions to the router from the WAN side by subnets (Menu - System - Management)

  • Added loop detection function for ME2-Lite, AX1, AX2 models (Menu - Services - Miscellaneous)

  • Added protection functions against brute force attacks in WEB UI/SSH (enabled by default)

  • Added output of session list for UDP-proxy

  • Added support for tr-069 stun

  • Added AC and Service Name parameters for PPPoE

Improvements

  • An extended set of parameters (including port forwarding) is transferred during migration from SNR-CPE firmware to EasyWRT. The full list of parameters is available here: https://nag.wiki/label/DOC/upgrade-to-easywrt.
  • Adjusted service of automatic software updates (relevant for very slow tariffs)

  • Corrected the logic of HWNAT management (AX1, ME2-Lite)
  • Corrected the logic of switching WPS modes
  • Adjusted behavior of igmpproxy when changing WAN
  • Corrected the logic of sending TransferComplete in cwmp after Download is completed
  • The boguspriv option is disabled by default (by popular demand)
  • The rfc1918_filter option is disabled by default (by popular demand)

Fixes

  • Errors in Ap-Cli modes with open encryption have been fixed

  • Some errors in Mesh (p1905) have been fixed, stability has been improved

  • Errors in WEB UI for various services have been fixed



...

Section
bordertrue


EasyWRT 2.2.2
Status
subtletrue
colourBlue
titlehotfix
 

 

2.2.2-2311081136-254bcc12
Column
width15

РУС

Expand

Новое

Улучшения

  • Скорректированы параметры конфигурации igmpproxy в ситуациях когда WAN-порт переназначен на LAN
  • Скорректированы параметры валидации полей для настройки сети режима AP-Cli (Wi-Fi повторитель). Теперь можно выбирать сети содержащие пробелы, Кириллицу и др. символы)

Исправления

  • Исправлена ошибка в WPS возникающая при отключении интерфейса 5ГГц



Column
width20

ENG

Expand
titleСlick here to expand...

New

Improvements

  • Adjusted igmpproxy configuration parameters in situations where the WAN port is reassigned to LAN
  • Adjusted field validation parameters for setting up the network in AP-Cli mode (Wi-Fi repeater). Now you can choose networks containing spaces, Cyrillic, and other symbols)

Fixes

  • Fixed an error in WPS that occurs when the 5GHz interface is disabled



...

Section
bordertrue


EasyWRT 2.2.1
Status
subtletrue
colourBlue
titlehotfix

2.2.1-2310131422-1471a471
Column
width15

РУС

Expand

Новое

  • Для внутренних целей добавлен новый MAC OUI (8C:AE:DB)

Улучшения

  • Исключена перезапись параметров (oui, serial_number, software_version, hardware_version) при восстановлении конфигурации из архива через CMWP



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • For internal purposes, a new MAC OUI (8C:AE:DB) has been added.

Improvements

  • Overwriting parameters (oui, serial_number, software_version, hardware_version) is excluded when restoring configuration from the archive via CMWP.




Section
bordertrue


EasyWRT 2.2.0
Status
colour

Green

Blue
titlerelease

 

2.2.0-2309291635-0986cd6f
Column
width15

РУС

Expand

Новое

  • Добавлена поддержка режимов AP-Client/Repeater. Описание режимов работы доступно по ссылке
  • Добавлена возможность переназначения WAN интерфейса на один из LAN портов маршрутизатора

Улучшения

  • Скорректирована логика отправки Bootstrap/Boot event событий в CWMP
  • Скорректирован Inform пакет в CWMP, теперь содержит параметр ModelName
  • Расширен набор параметров сохраняемых при миграции с SNR-CPE до EasyWRT. Полный перечень параметров доступен тут https://nag.wiki/pages/viewpage.action?pageId=32245989

Исправления

  • Исправлена логика вызова DHCP Renew при потере соединения с ACS сервером. Ошибка могла приводить к цикличному вызову DHCP Renew
  • Исправлена ошибка при запуске WPS на модели SNR-CPE-AX1
  • Исправлено падение WEB UI которое могло возникать при переходе на страницу обновления прошивки
  • Доработана функция смены ширины канала в Mesh



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added support for AP-Client/Repeater modes.
  • Added the ability to reassign the WAN interface to one of the LAN ports of the router

Improvements

  • Adjusted the logic of sending Bootstrap/Boot event events in CWMP
  • Adjusted the Inform packet in CWMP, now containing the ModelName parameter
  • Expanded the set of parameters saved during migration from SNR-CPE to EasyWRT. The full list of parameters is available here  https://nag.wiki/label/DOC/upgrade-to-easywrt

Fixes

  • Fixed the logic of calling DHCP Renew when losing connection to the ACS server. The error could lead to cyclic calling of DHCP Renew
  • Fixed an error when starting WPS on the SNR-CPE-AX1 model
  • Fixed a WEB UI crash that could occur when switching to the firmware update page
  • Improved the function of changing the channel width in Mesh.



...

Section
bordertrue


EasyWRT 2.1.2
Status
subtletrue
colourBlue
titlehotfix

 

2.1.2-2309181008-4ea634fcb1
Column
width15

РУС

Expand

Исправления

  • Исправлена логика отправки DHCP DORA при загрузке системы или при применении настроек в меню настроек WAN
  • Исправлена проблема при которой в некоторых случаях igmpproxy мог не запускаться



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Corrected the logic of sending DHCP DORA during system boot or when applying settings in the WAN settings menu.
  • Fixed an issue where igmpproxy may not start in some cases.



...

Section
bordertrue


EasyWRT 2.1.1
Status
subtletrue
colourBlue
titlehotfix

 

2.1.1-2309010904-2f18385cd4
Column
width15

РУС

Expand

Исправления

  • Исправлена ошибка с применением параметров DNS в мастере настроек



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Fixed an error with applying DNS parameters in the settings master.




Section
bordertrue


EasyWRT 2.1.0
Status
colour

Green

Blue
titlerelease

2.1.0-2308041731-0c11c11bb5
Column
width15

РУС

Expand

Новое

  • Добавлена поддержка режима AP-Bridge
  • Добавлена функция обнаружения конфликта сетей LAN/WAN. Уведомление будет отображено в WEB UI

Улучшения

  • Внесены некоторые улучшения в WEB UI (стили, тексты, отступы, и др...) и функции управления Политиками доступа Wi-Fi
  • По многочисленным просьбам доработан Mesh. Теперь агента можно подключить к контроллеру WAN интерфейсом
  • Переработано создание и управление MBSSID

Исправления

  • Исправлены ошибки в работе Mesh для AX1
  • Исправлены Wi-Fi счетчики для AX1



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added support for AP-Bridge mode
  • Added LAN/WAN network conflict detection feature. Notification will be displayed in the WEB UI

Improvements

  • Some improvements have been made to the WEB UI (styles, texts, margins, etc.) and Wi-Fi Access Policy management functions
  • Mesh has been enhanced based on numerous requests. Now the agent can be connected to the controller via the WAN interface
  • Reworked the creation and management of MBSSID.

Fixes

  • Errors in Mesh operation for AX1 have been fixed
  • Wi-Fi counters for AX1 have been fixed




Section
bordertrue


EasyWRT 2.0.

2

Status
colourBlue
titlerelease
/
Status
subtletrue
colourBlue
titlehotfix

2.0.2-2307241434-c19d80cdda
Column
width15

РУС

Expand

Новое

  • Добавлен параметр DefaultConnectionService(TR-069)
  • Для реализации задач гостевого доступа по LAN интерфейсам добавили расширенное управление коммутатором и VLAN-ми

Улучшения

  • Управление WANPPPConnection(TR-069) реализовано согласно BBF
  • По вашим отзывам улучшена страница управления пробросом портов

Исправления

  • Исправлены ошибки в WEB UI (графики, переводы, страницы управления)
  • Исправлены ошибки запуска NTP-сервера
  • Исправлены ошибки в Mesh, повышена стабильность



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added parameter DefaultConnectionService (TR-069)
  • Extended switch management and VLANs were added to implement guest access tasks on LAN interfaces.

Improvements

  • WANPPPConnection (TR-069) management implemented according to BBF
  • Port forwarding management page has been improved based on your feedback

Fixes

  • Errors in WEB UI (graphics, translations, management pages) have been fixed
  • NTP server startup errors have been fixed
  • Errors in Mesh have been fixed, stability has been improved



...

Section
bordertrue


EasyWRT 0.11.3
Status
subtletrue
colourYellow
titlebeta

Column
width15

РУС

Expand

Новое

  • Добавлен режим Zeroconf для конфигурации WAN

Улучшения

  • Доработана логика работы IGMP
  • Улучшена обработка соединений при роуминге клиентов
  • Отключена поддержка Interworking (802.11u) в конфигурации по умолчанию

Исправления

  • Исправлен механизм оффлоада (разгрузки соединений) в PPTP/L2TP для ME2-Lite
  • Исправлены ошибки в параметрах CWMP (InternetGatewayDevice.WIFI)



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added Zeroconf mode for WAN configuration

Improvements

  • Improved IGMP logic
  • Enhanced handling of connections when clients roam
  • Disabled Interworking (802.11u) support in default configuration

Fixes

  • Fixed offload mechanism in PPTP/L2TP for ME2-Lite
  • Fixed errors in CWMP parameters (InternetGatewayDevice.WIFI)



...

Section
bordertrue


EasyWRT 0.11.1
Status
subtletrue
colourYellow
titlebeta

 

Column
width15

ENG

Expand

Новое

  • InternetGatewayDevice.LANConfigSecurity CWMP branch
  • arping based fault detection and address re-acquiring
  • icmp echo requests blocking checkbox
  • MAC filtering page (Black-List, Access-List)
  • CWMP branch Доработать ветку WANDevice.1.WANConnectionDevice.1.WANIPConnection.{i}
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANPPPConnection.{i}.Stats CWMP branch
  • custom counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • CRC error counters to LANDevice.{i}.LANEthernetInterfaceConfig.{i}.Stats CWMP branch
  • InternetGatewayDevice.Layer2Bridging.Bridge CWMP branch
  • X_SNR_ClientUptime custom CWMP parameter
  • ablity to change login/password through WEB UI
  • WAN restart feature
  • abilty to configure IPTV/SIP porth through configuration wizard
  • WEB UI access control list feature
  • abilty to change password through configuration wizard
  • ability to read and write login/password records for the mtk_factory utility
  • warning messages if unable to start radio interface

Улучшения

  • Fixed or Improved
  • Fixed packet loss in 2.4GHz band when working with MVX01A STB
  • Fixed some WEB UI bugs
  • Fixed ethernet port order in LANEthernetInterfaceConfig CWMP branch for AX1
  • Fixed traffic graph in dashboard
  • Fixed invalid behavior when allowing remote SSH access
  • Disabled "User" account by default
  • Restart services instead of rebooting the router after finishing configuration wizard
  • Make udhcpc send router model in option 60
  • Enforce restricted RPC configuration for "User" account
  • Hide some WEB UI elements for "User" account
  • Rename "Enable" to "BridgeEnable" in Layer2Bridging CWMP branch

Исправления

  • Improved InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.{i} CWMP branch
  • Improved CWMP response time
  • Improved loading time of "Firmware" page
  • Improved WI-FI channel selection via CWMP
  • Refactored switch configuration



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • InternetGatewayDevice.LANConfigSecurity CWMP branch
  • arping based fault detection and address re-acquiring
  • icmp echo requests blocking checkbox
  • MAC filtering page (Black-List, Access-List)
  • CWMP branch Доработать ветку WANDevice.1.WANConnectionDevice.1.WANIPConnection.{i}
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANPPPConnection.{i}.Stats CWMP branch
  • custom counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • CRC error counters to LANDevice.{i}.LANEthernetInterfaceConfig.{i}.Stats CWMP branch
  • InternetGatewayDevice.Layer2Bridging.Bridge CWMP branch
  • X_SNR_ClientUptime custom CWMP parameter
  • ablity to change login/password through WEB UI
  • WAN restart feature
  • abilty to configure IPTV/SIP porth through configuration wizard
  • WEB UI access control list feature
  • abilty to change password through configuration wizard
  • ability to read and write login/password records for the mtk_factory utility
  • warning messages if unable to start radio interface

Improvements

  • Fixed or Improved
  • Fixed packet loss in 2.4GHz band when working with MVX01A STB
  • Fixed some WEB UI bugs
  • Fixed ethernet port order in LANEthernetInterfaceConfig CWMP branch for AX1
  • Fixed traffic graph in dashboard
  • Fixed invalid behavior when allowing remote SSH access
  • Disabled "User" account by default
  • Restart services instead of rebooting the router after finishing configuration wizard
  • Make udhcpc send router model in option 60
  • Enforce restricted RPC configuration for "User" account
  • Hide some WEB UI elements for "User" account
  • Rename "Enable" to "BridgeEnable" in Layer2Bridging CWMP branch

Fixes

  • Improved InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.{i} CWMP branch
  • Improved CWMP response time
  • Improved loading time of "Firmware" page
  • Improved WI-FI channel selection via CWMP
  • Refactored switch configuration



...