Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Excerpt


Section
bordertrue


EasyWRT 2.5.0
Status
colourGreen
titlerelease

Status
colourYellow
titlesoon

Column
width15

РУС

Expand
...



Column
width20

ENG

Expand
titleСlick here to expand...

...




Section
bordertrue


EasyWRT 2.4.5 
Status
subtletrue
colourBlue
titlehotfix
Status
colourBlue
titlelatest

 

Column
width15

РУС

Expand

Исправления

Исправлена ошибка отображения подключенных LAN клиентов в арендах DHCP
image-2024-05-27-13-30-37-742.pngImage RemovedImage Added



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

Fixed issue with displaying connected LAN clients in DHCP leases
image-2024-05-27-13-30-37-742.pngImage RemovedImage Added




Section
bordertrue


EasyWRT 2.4.4 
Status
subtletrue
colourBlue
titlehotfix

Column
width15

РУС

Expand

Исправления

  1. Скорректированы функции проверки лицензий ПО



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Adjusted software license verification functions




Section
bordertrue


EasyWRT 2.4.3 
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  1. Исправлена проверка контрольной суммы при обновлении прошивки
  2. Исправлены ошибки в bandsteering, вызванные одновременным включением bandsteering и активацией mesh. Повышена стабильность



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Checksum verification has been fixed during firmware update.

  2. Errors in bandsteering caused by simultaneous activation of bandsteering and mesh have been fixed. Stability has been improved




Section
bordertrue


EasyWRT 2.4.2
Status
subtletrue
colourBlue
titlehotfix

Column
width15

РУС

Expand

Исправления

  1. Мелкие исправления в работе Mesh и сервиса автоматического обновления ПО



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Minor fixes in Mesh operation and software update service




Section
bordertrue


EasyWRT 2.4.1
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  1. Исправлена ошибка, которая приводила к сбою элементов WEB UI



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  1. Fixed a bug that caused WEB UI elements to crash




Section
bordertrue


EasyWRT 2.4.0
Status
colourGreen
titlerelease

 

Column
width15

РУС

Expand

Новое

  1. Добавлена функция Failover для модели SNR LTE - Документация

  2. Добавлена функция объединения сетей и поддержка управления диапазоном (Band Steering) - Документация
  3. Сервис централизованного обновления сети в Mesh - Документация
  4. Для операторов связи реализована система быстрой кастомизации ПО - "EasyCustom". Для получения подробной консультации и документации обратитесь к вашему менеджеру;
  5. В меню настроек VLAN добавлена поддержка 802.1p (кроме моделей W4N, MD2):

Улучшения

  1. Добавлено отображение поддержки 802.11k/v/r со стороны клиента в списке активных подключений: 
  2. Скорректировали логику поведения Mesh-агента при подключении к контроллеру: Клиенты подключенные к Mesh-агенту в процессе подключения к контроллеру будут отключены от роутера;
  3. Скорректировали механизм активации режима Mesh-агента: Если в течении двух минут соединение агента с контроллером не было установлено, то режим агента на маршрутизаторе будет отключен;
  4. Скорректирована функция определения типа подключения клиента в арендах DHCP;
  5. Добавлена возможность записи и хранения системного журнала в ПЗУ:
  6. Добавлена возможность отключения LAN интерфейсов из WEB UI;
  7. Расширен набор параметров для cwmp (TR-069/098):
     - AssociatedDevice.{i}.
     - LANEthernetInterfaceConfig.{i}.Stats.
     - InternetGatewayDevice.Services.SSHRemoteManagement.
     - InternetGatewayDevice.Services.WebRemoteManagement.
     - InternetGatewayDevice.Layer3Forwarding.Forwarding.
     - WANPPPConnection.­{i}.X_SNR_ConnectionInitializationTime.
     - WANIPConnection.{i}.X_SNR_ConnectionInitializationTime.
     - InternetGatewayDevice.TraceRouteDiagnostics.RouteHops.
     - InternetGatewayDevice.DownloadDiagnostics.
  8. Облегчена страница управления UDP-proxy, выведена статистика по подключениям:
  9. Переработали страницу управления гостевыми сетями. Выбор интерфейсов стал понятнее:
  10. Улучшено определение статуса подключения Mesh на контроллере.

Исправления

  1. Выполнено обновление драйверов (исправлены ошибки в обработке beacon frame, внутренних служб, WPA3, закрыты уязвимости в WPS);
  2. Исправлена ошибка запуска утилиты switch для моделей W4N, MD2;
  3. Исправлен обработчик паролей вводимых для режимов AP-Cli / Router;
  4. Исправлена функция отображения подключенных клиентов к Mesh-контроллеру/агенту по ethernet;
  5. Исправлена работа автоматического выбора канала;
  6. Исправлены ошибки в Mesh и его компонентах, повышена стабильность работы;
  7. Исправлены мелкие ошибки при генерации архива с конфигурацией;
  8. Исправлены ошибки при создании MBSSID для новых моделей маршрутизаторов;
  9. Исправлены ошибки в работе ALG для PPTP/RTSP/FTP и др.;
  10. Мелкие исправления WEB UI.




Column
width20

ENG

Expand
titleСlick here to expand...

New

  1. Added Failover function for the SNR LTE model - Documentation

  2. Added network aggregation function and support for band steering - Documentation
  3. Centralized network update service enabled in Mesh - Documentation
  4. A system for quick software customization - "EasyCustom" - has been implemented for telecom operators. For detailed advice and documentation, contact your manager;
  5. Added support for 802.1p to the VLAN settings menu (except W4N, MD2 models
    )

Improvements

  1. Added display of 802.11k/v/r support on the client side in the list of active connections
  2. Adjusted the logic of the Mesh agent’s behavior when connecting to the controller: Clients connected to the Mesh agent will be disconnected from the router while connecting to the controller;
  3. The mechanism for activating the Mesh agent mode has been adjusted: If within two minutes the connection between the agent and the controller has not been established, then the agent mode on the router will be disabled;
  4. The function of determining the client connection type in DHCP leases has been adjusted;
  5. Added the ability to record and store the system log in ROM (not recommended unless absolutely necessary):
  6. Added the ability to disable LAN interfaces from WEB UI;
  7. Expanded set of parameters for cwmp (TR-069/098):
     - AssociatedDevice.{i}.
     - LANEthernetInterfaceConfig.{i}.Stats.
     - InternetGatewayDevice.Services.SSHRemoteManagement.
     - InternetGatewayDevice.Services.WebRemoteManagement.
     - InternetGatewayDevice.Layer3Forwarding.Forwarding.
     - WANPPPConnection.­{i}.X_SNR_ConnectionInitializationTime.
     - WANIPConnection.{i}.X_SNR_ConnectionInitializationTime.
     - InternetGatewayDevice.TraceRouteDiagnostics.RouteHops.
     - InternetGatewayDevice.DownloadDiagnostics.
  8. The UDP-proxy management page has been simplified, connection statistics have been displayed:
  9. Reworked the page for managing guest networks. The choice of interfaces has become clearer:
  10. Improved detection of Mesh connection status on the controller.

Fixes

  1. Drivers have been updated (fixed errors in processing beacon frame, internal services, WPA3, vulnerabilities in WPS have been closed);
  2. Fixed an error in launching the switch utility for W4N, MD2 models;
  3. Fixed password handler for AP-Cli / Router modes;
  4. Fixed the function displaying connected clients to the Mesh controller/agent via ethernet;
  5. Fixed automatic channel selection;
  6. Errors in Mesh and its components have been fixed, stability has been improved;
  7. Fixed minor errors in generating configuration archive;
  8. Fixed errors in creating MBSSID for new router models;
  9. Fixed errors in ALG operation for PPTP/RTSP/FTP, etc.;
  10. Minor fixes in WEB UI.




Section
bordertrue


EasyWRT 2.3.2
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  • Исправлена неработающая опция отключения для igmpproxy
  • Исправлен неправильно работающий переключатель для запуска авто обновления ПО
  • Исправлена проблема с присвоением zeroconf ip адреса при перезагрузках



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Fixed non-working disable option for igmpproxy
  • Fixed an incorrectly working switch for running auto software updates
  • Fixed the problem with assigning a zeroconf IP address during reboots




Section
bordertrue


EasyWRT 2.3.1
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  • Небольшие исправления в построении маршрутов в конфигурации Dual-Access (WAN+VPN)

  • Исправлен формат времени на странице контроля доступа

Улучшения

  • Журнал ядра теперь отображает подсветку (в CLI) и время логирования



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Minor fixes when creating routes in a dual access configuration (WAN+VPN)

  • Fixed time format on the access control page

Improvements

  • The kernel log now displays highlighting (in CLI) and logging time




Section
bordertrue


EasyWRT 2.3.0 
Status
colourGreen
titlerelease

Column
width15

РУС

Expand

Новое

  • Добавлено управление ограничениями доступа к роутеру со стороны WAN по подсетям (Меню - Система - Управление)
  • Добавлена функция детектирования петель для моделей ME2-Lite, AX1, AX2 (Меню - Сервисы - Разное)
  • Добавлены функции защиты от bruteforce атак в WEB UI/SSH (по умолчанию включено)

  • Добавлен вывод списка сессий для UDP-proxy

  • Добавлена поддержка tr-069 stun

  • Для PPPoE добавлены параметры AC и Service Name

Улучшения

  • Расширен набор параметров(добавили проброс портов) переносимых при миграции с прошивки SNR-CPE на EasyWRT. Полный перечень параметров доступен тут https://nag.wiki/pages/viewpage.action?pageId=32245989
  • Скорректирован сервис авто обновления ПО (актуально для очень медленных тарифов)
  • Скорректирована логика управления HWNAT (AX1, ME2-Lite)
  • Скорректирована логика переключения WPS режимов
  • Скорректировано поведение igmpproxy при смене WAN
  • Скорректирована логика отправки TransferComplete в cwmp после выполнения Download
  • Опция boguspriv по умолчанию отключена (по многочисленным просьбам)
  • Опция rfc1918_filter по умолчанию отключена (по многочисленным просьбам)

Исправления

  • Исправлены ошибки для режимов Ap-Cli с открытым шифрованием

  • Исправлены некоторые ошибки в Mesh (p1905), повышена стабильность

  • Исправлены ошибки в WEB UI по различным сервисам



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added control of access restrictions to the router from the WAN side by subnets (Menu - System - Management)

  • Added loop detection function for ME2-Lite, AX1, AX2 models (Menu - Services - Miscellaneous)

  • Added protection functions against brute force attacks in WEB UI/SSH (enabled by default)

  • Added output of session list for UDP-proxy

  • Added support for tr-069 stun

  • Added AC and Service Name parameters for PPPoE

Improvements

  • An extended set of parameters (including port forwarding) is transferred during migration from SNR-CPE firmware to EasyWRT. The full list of parameters is available here: https://nag.wiki/label/DOC/upgrade-to-easywrt.
  • Adjusted service of automatic software updates (relevant for very slow tariffs)

  • Corrected the logic of HWNAT management (AX1, ME2-Lite)
  • Corrected the logic of switching WPS modes
  • Adjusted behavior of igmpproxy when changing WAN
  • Corrected the logic of sending TransferComplete in cwmp after Download is completed
  • The boguspriv option is disabled by default (by popular demand)
  • The rfc1918_filter option is disabled by default (by popular demand)

Fixes

  • Errors in Ap-Cli modes with open encryption have been fixed

  • Some errors in Mesh (p1905) have been fixed, stability has been improved

  • Errors in WEB UI for various services have been fixed




Section
bordertrue


EasyWRT 2.2.2
Status
subtletrue
colourBlue
titlehotfix
 

 

Column
width15

РУС

Expand

Новое

Улучшения

  • Скорректированы параметры конфигурации igmpproxy в ситуациях когда WAN-порт переназначен на LAN
  • Скорректированы параметры валидации полей для настройки сети режима AP-Cli (Wi-Fi повторитель). Теперь можно выбирать сети содержащие пробелы, Кириллицу и др. символы)

Исправления

  • Исправлена ошибка в WPS возникающая при отключении интерфейса 5ГГц



Column
width20

ENG

Expand
titleСlick here to expand...

New

Improvements

  • Adjusted igmpproxy configuration parameters in situations where the WAN port is reassigned to LAN
  • Adjusted field validation parameters for setting up the network in AP-Cli mode (Wi-Fi repeater). Now you can choose networks containing spaces, Cyrillic, and other symbols)

Fixes

  • Fixed an error in WPS that occurs when the 5GHz interface is disabled




Section
bordertrue


EasyWRT 2.2.1
Status
subtletrue
colourBlue
titlehotfix

Column
width15

РУС

Expand

Новое

  • Для внутренних целей добавлен новый MAC OUI (8C:AE:DB)

Улучшения

  • Исключена перезапись параметров (oui, serial_number, software_version, hardware_version) при восстановлении конфигурации из архива через CMWP



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • For internal purposes, a new MAC OUI (8C:AE:DB) has been added.

Improvements

  • Overwriting parameters (oui, serial_number, software_version, hardware_version) is excluded when restoring configuration from the archive via CMWP.




Section
bordertrue


EasyWRT 2.2.0
Status
colourGreen
titlerelease

 

Column
width15

РУС

Expand

Новое

  • Добавлена поддержка режимов AP-Client/Repeater. Описание режимов работы доступно по ссылке
  • Добавлена возможность переназначения WAN интерфейса на один из LAN портов маршрутизатора

Улучшения

  • Скорректирована логика отправки Bootstrap/Boot event событий в CWMP
  • Скорректирован Inform пакет в CWMP, теперь содержит параметр ModelName
  • Расширен набор параметров сохраняемых при миграции с SNR-CPE до EasyWRT. Полный перечень параметров доступен тут https://nag.wiki/pages/viewpage.action?pageId=32245989

Исправления

  • Исправлена логика вызова DHCP Renew при потере соединения с ACS сервером. Ошибка могла приводить к цикличному вызову DHCP Renew
  • Исправлена ошибка при запуске WPS на модели SNR-CPE-AX1
  • Исправлено падение WEB UI которое могло возникать при переходе на страницу обновления прошивки
  • Доработана функция смены ширины канала в Mesh



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added support for AP-Client/Repeater modes.
  • Added the ability to reassign the WAN interface to one of the LAN ports of the router

Improvements

  • Adjusted the logic of sending Bootstrap/Boot event events in CWMP
  • Adjusted the Inform packet in CWMP, now containing the ModelName parameter
  • Expanded the set of parameters saved during migration from SNR-CPE to EasyWRT. The full list of parameters is available here  https://nag.wiki/label/DOC/upgrade-to-easywrt

Fixes

  • Fixed the logic of calling DHCP Renew when losing connection to the ACS server. The error could lead to cyclic calling of DHCP Renew
  • Fixed an error when starting WPS on the SNR-CPE-AX1 model
  • Fixed a WEB UI crash that could occur when switching to the firmware update page
  • Improved the function of changing the channel width in Mesh.




Section
bordertrue


EasyWRT 2.1.2
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  • Исправлена логика отправки DHCP DORA при загрузке системы или при применении настроек в меню настроек WAN
  • Исправлена проблема при которой в некоторых случаях igmpproxy мог не запускаться



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Corrected the logic of sending DHCP DORA during system boot or when applying settings in the WAN settings menu.
  • Fixed an issue where igmpproxy may not start in some cases.




Section
bordertrue


EasyWRT 2.1.1
Status
subtletrue
colourBlue
titlehotfix

 

Column
width15

РУС

Expand

Исправления

  • Исправлена ошибка с применением параметров DNS в мастере настроек



Column
width20

ENG

Expand
titleСlick here to expand...

Fixes

  • Fixed an error with applying DNS parameters in the settings master.




Section
bordertrue


EasyWRT 2.1.0
Status
colourGreen
titlerelease

Column
width15

РУС

Expand

Новое

  • Добавлена поддержка режима AP-Bridge
  • Добавлена функция обнаружения конфликта сетей LAN/WAN. Уведомление будет отображено в WEB UI

Улучшения

  • Внесены некоторые улучшения в WEB UI (стили, тексты, отступы, и др...) и функции управления Политиками доступа Wi-Fi
  • По многочисленным просьбам доработан Mesh. Теперь агента можно подключить к контроллеру WAN интерфейсом
  • Переработано создание и управление MBSSID

Исправления

  • Исправлены ошибки в работе Mesh для AX1
  • Исправлены Wi-Fi счетчики для AX1



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added support for AP-Bridge mode
  • Added LAN/WAN network conflict detection feature. Notification will be displayed in the WEB UI

Improvements

  • Some improvements have been made to the WEB UI (styles, texts, margins, etc.) and Wi-Fi Access Policy management functions
  • Mesh has been enhanced based on numerous requests. Now the agent can be connected to the controller via the WAN interface
  • Reworked the creation and management of MBSSID.

Fixes

  • Errors in Mesh operation for AX1 have been fixed
  • Wi-Fi counters for AX1 have been fixed




Section
bordertrue


EasyWRT 2.0.2
Status
subtletrue
colourBlue
titlehotfix

Column
width15

РУС

Expand

Новое

  • Добавлен параметр DefaultConnectionService(TR-069)
  • Для реализации задач гостевого доступа по LAN интерфейсам добавили расширенное управление коммутатором и VLAN-ми

Улучшения

  • Управление WANPPPConnection(TR-069) реализовано согласно BBF
  • По вашим отзывам улучшена страница управления пробросом портов

Исправления

  • Исправлены ошибки в WEB UI (графики, переводы, страницы управления)
  • Исправлены ошибки запуска NTP-сервера
  • Исправлены ошибки в Mesh, повышена стабильность



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added parameter DefaultConnectionService (TR-069)
  • Extended switch management and VLANs were added to implement guest access tasks on LAN interfaces.

Improvements

  • WANPPPConnection (TR-069) management implemented according to BBF
  • Port forwarding management page has been improved based on your feedback

Fixes

  • Errors in WEB UI (graphics, translations, management pages) have been fixed
  • NTP server startup errors have been fixed
  • Errors in Mesh have been fixed, stability has been improved




Section
bordertrue


EasyWRT 0.11.3
Status
subtletrue
colourYellow
titlebeta

Column
width15

РУС

Expand

Новое

  • Добавлен режим Zeroconf для конфигурации WAN

Улучшения

  • Доработана логика работы IGMP
  • Улучшена обработка соединений при роуминге клиентов
  • Отключена поддержка Interworking (802.11u) в конфигурации по умолчанию

Исправления

  • Исправлен механизм оффлоада (разгрузки соединений) в PPTP/L2TP для ME2-Lite
  • Исправлены ошибки в параметрах CWMP (InternetGatewayDevice.WIFI)



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added Zeroconf mode for WAN configuration

Improvements

  • Improved IGMP logic
  • Enhanced handling of connections when clients roam
  • Disabled Interworking (802.11u) support in default configuration

Fixes

  • Fixed offload mechanism in PPTP/L2TP for ME2-Lite
  • Fixed errors in CWMP parameters (InternetGatewayDevice.WIFI)




Section
bordertrue


EasyWRT 0.11.2
Status
subtletrue
colourYellow
titlebeta

 

Column
width15

РУС

Expand

Новое

  • Добавлена поддержка NMBM для модели AX1



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • Added support for NMBM for AX1 model.




Section
bordertrue


EasyWRT 0.11.1
Status
subtletrue
colourYellow
titlebeta

 

Column
width15

ENG

Expand

Новое

  • InternetGatewayDevice.LANConfigSecurity CWMP branch
  • arping based fault detection and address re-acquiring
  • icmp echo requests blocking checkbox
  • MAC filtering page (Black-List, Access-List)
  • CWMP branch Доработать ветку WANDevice.1.WANConnectionDevice.1.WANIPConnection.{i}
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANPPPConnection.{i}.Stats CWMP branch
  • custom counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • CRC error counters to LANDevice.{i}.LANEthernetInterfaceConfig.{i}.Stats CWMP branch
  • InternetGatewayDevice.Layer2Bridging.Bridge CWMP branch
  • X_SNR_ClientUptime custom CWMP parameter
  • ablity to change login/password through WEB UI
  • WAN restart feature
  • abilty to configure IPTV/SIP porth through configuration wizard
  • WEB UI access control list feature
  • abilty to change password through configuration wizard
  • ability to read and write login/password records for the mtk_factory utility
  • warning messages if unable to start radio interface

Улучшения

  • Fixed or Improved
  • Fixed packet loss in 2.4GHz band when working with MVX01A STB
  • Fixed some WEB UI bugs
  • Fixed ethernet port order in LANEthernetInterfaceConfig CWMP branch for AX1
  • Fixed traffic graph in dashboard
  • Fixed invalid behavior when allowing remote SSH access
  • Disabled "User" account by default
  • Restart services instead of rebooting the router after finishing configuration wizard
  • Make udhcpc send router model in option 60
  • Enforce restricted RPC configuration for "User" account
  • Hide some WEB UI elements for "User" account
  • Rename "Enable" to "BridgeEnable" in Layer2Bridging CWMP branch

Исправления

  • Improved InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.{i} CWMP branch
  • Improved CWMP response time
  • Improved loading time of "Firmware" page
  • Improved WI-FI channel selection via CWMP
  • Refactored switch configuration



Column
width20

ENG

Expand
titleСlick here to expand...

New

  • InternetGatewayDevice.LANConfigSecurity CWMP branch
  • arping based fault detection and address re-acquiring
  • icmp echo requests blocking checkbox
  • MAC filtering page (Black-List, Access-List)
  • CWMP branch Доработать ветку WANDevice.1.WANConnectionDevice.1.WANIPConnection.{i}
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • more counters to WANDevice.{i}.WANConnectionDevice.{i}.WANPPPConnection.{i}.Stats CWMP branch
  • custom counters to WANDevice.{i}.WANConnectionDevice.{i}.WANIPConnection.{i}.Stats CWMP branch
  • CRC error counters to LANDevice.{i}.LANEthernetInterfaceConfig.{i}.Stats CWMP branch
  • InternetGatewayDevice.Layer2Bridging.Bridge CWMP branch
  • X_SNR_ClientUptime custom CWMP parameter
  • ablity to change login/password through WEB UI
  • WAN restart feature
  • abilty to configure IPTV/SIP porth through configuration wizard
  • WEB UI access control list feature
  • abilty to change password through configuration wizard
  • ability to read and write login/password records for the mtk_factory utility
  • warning messages if unable to start radio interface

Improvements

  • Fixed or Improved
  • Fixed packet loss in 2.4GHz band when working with MVX01A STB
  • Fixed some WEB UI bugs
  • Fixed ethernet port order in LANEthernetInterfaceConfig CWMP branch for AX1
  • Fixed traffic graph in dashboard
  • Fixed invalid behavior when allowing remote SSH access
  • Disabled "User" account by default
  • Restart services instead of rebooting the router after finishing configuration wizard
  • Make udhcpc send router model in option 60
  • Enforce restricted RPC configuration for "User" account
  • Hide some WEB UI elements for "User" account
  • Rename "Enable" to "BridgeEnable" in Layer2Bridging CWMP branch

Fixes

  • Improved InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.{i} CWMP branch
  • Improved CWMP response time
  • Improved loading time of "Firmware" page
  • Improved WI-FI channel selection via CWMP
  • Refactored switch configuration




...