Все публикуемые версии ПО EasyWRT являются стабильными.
К установке и использованию рекомендована крайняя выпущенная версия ПО.
Status
colour
Blue
title
latest
- Крайняя версия
Status
colour
Green
title
release
- Основной релиз, чаще всего выпускается в конце квартала
Status
subtle
true
colour
Blue
title
hotfix
- Обновление релиза с доработками и/или исправлениями
Column
width
50%20px
ENG
Tip
icon
false
title
Description
All published versions of EasyWRT software are stable.
The latest released version of the software is preferred for installation and use.
Status
colour
Blue
title
latest
- Latest version
Status
colour
Green
title
release
- Major release, most often released at the end of the quarter
Status
subtle
true
colour
Blue
title
hotfix
- Updated release with improvements and/or corrections
Section
border
true
EasyWRT 2.5.0
Status
colour
Green
title
release
Status
colour
Yellow
Blue
title
very soon
latest
Column
width
15
РУС
Expand
Excerpt
hidden
true
Новое
Добавлено автоопределение роли роутера SNR при подключении в Mesh, документация дополнена;
Для моделей роутеров SNR с поддержкой LTE реализован механизм проверки и перезагрузки модема при зависании; Image Modified
Внедрен сервис отправки статистики. Сервис позволяет передавать диагностические данные о работе роутера с ПО EasyWRT на сервер ООО "НАГ". Отправленные данные помогут улучшить функциональность EasyWRT при разработке нового функционала или при доработке имеющегося. Сервис не затрагивает конфиденциальные данные, а его активация/деактивация опциональна.
Улучшения
Улучшено логирование Mesh, сделано более "читаемым";
Сервис EasyCustom дополнен новыми командами WIFI_SET_PMF_2GHZ/5GHZ и WIFI_SET_BW2GHZ/5GHZ. Соответствующая документация дополнена.
Улучшен механизм активации Mesh. Если на роутере активирован Mesh-агент через кнопку Mesh/RST, но было прервано питание и не завершился таймер соединения, Mesh перейдет в состояние "Отключено";
Увеличено количество передаваемых параметров в ветке InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i};
Расширен набор параметров диагностики для SNR LTE в диагностическом архиве;
Добавлена кнопка для ручного перезапуска модема в SNR LTE; Image Modified
Исправления
Для моделей SNR AX2, ME2-Lite и MD2 исправлена ошибка пустой конфигурации Wi-Fi, возникающая при отключении питания сразу после активации Mesh кнопкой;
Исправлена ошибка вывода поддерживаемых Wi-Fi стандартов при сканировании радиоэфира через ubus;
Исправлена ошибка неправильного расположения элементов WEB UI на странице "Настройка WAN", возникающая при переходе со страницы на страницу;
Исправлена ошибка работы драйвера Wi-Fi для моделей ME2-Lite, MD2, AX1, возникающая при работе Band Steering, приводящая к переключению клиента в другой диапазон;
Исправлена
критическая
ошибка
в работе ядра
, возникающая при использовании MBSSID и гостевых сетей, приводящая к сбою в работе ядра;
Исправлена ошибка в работе DHCPv4-сервера, когда после его выключения/включения, сервер не отвечал на DHCP Discover;
Исправлена ошибка в работе сервиса диагностики ping. При указании в поле ipv4 доменного имени, а не ipv4-адреса, выполнялся ping ipv6;
Исправлена ошибка в параметрах LANDevice.1.LANEthernetInterfaceConfig для модели SNR AX2. Измененные значения принимались, но при чтении параметров возвращались неправильные значения;
Исправлена ошибка конфигурации VPN-интерфейсов, когда при настройке интерфейса PPTP/L2TP, после смены типа VPN на PPPoE интерфейс не поднимался и маршрут по умолчанию строился через WAN;
Исправлена ошибка, когда на SNR-CPE W4N (rev. N) отображался чекбокс включения Band Steering;
Исправлены ошибки в работе multicast-трафика при одновременной нагрузке роутера другими клиентами устройствами, подключенными в соседних портах LAN-портах с согласованием 100 Мбит/с.;
Исправлена ошибка, приводящая к переключению интерфейса 5 ГГц в MCS0 при активном multicast-потоке и дополнительной нагрузке трафиком.
...
Column
width
20
ENG
Expand
title
Сlick here to expand...
excerpt
hidden
true
New
Improvements
Fixes
...
Section
New
Added automatic detection of the role of the SNRrouterwhenconnected to theMesh, the documentation has been updated;
ForLTE-enabledSNRroutermodels, a mechanism is implemented to checkandreboot the modemwhen it freezes; Image Added
A service for sendingstatistics "Health service" has been introduced. The serviceallows you to transferdiagnosticdataabout the operation of the routerfromthe EasyWRT software totheNAGLLCserver. The datasent will helpimprove the functionalityof EasyWRT whendevelopingnewfunctionalityorwhenrefiningexisting ones. The service does notaffectconfidentialdata,anditsactivation/deactivation is optional.
Improvements
ImprovedMeshlogging,mademore"readable";
The EasyCustom servicehas been supplemented with newcommandsWIFI_SET_PMF_2GHZ/5GHZandWIFI_SET_BW2GHZ/5GHZ. The relevantdocumentation has been updated;
The Meshactivationmechanism has been improved.If the Meshagent is activatedon the routervia the Mesh/RSTbutton,but the powerwasinterruptedand the connectiontimer did notend, the Mesh will switchtothe"Disconnected" state;
Thelogic of the transmittedvalues of the localTimeZoneparameterof the InternetGatewayDevice.Timebranch has been improved; The number of transmittedparametersin the InternetGatewayDevice.LANDevicebranch has been increased .{i}.WLANConfiguration.{i};
Expanded the set of diagnosticparametersforLTESNRin the diagnosticarchive;
Added a buttonformanuallyrestarting the modeminSNRLTE; Image Added
Fixes
For the SNR AX2, ME2-Lite and MD2 models, an empty Wi-Fi configuration error has been fixed, which occurs when the power is turned off immediately after activating the Mesh button;
Fixed the error of displaying supported Wi-Fi standards when scanning the radio broadcast via ubus;
Fixed an error of incorrect location of WEB UI elements on the WAN Setup page that occurs when switching from page to page;
Fixed a Wi-Fi driver error for ME2-Lite, MD2, AX1 models that occurs when Band Steering is running, leading to the client switching to another range;
Fixed a bug that occurs when using MBSSID and guest networks, causing the kernel to malfunction;
Fixed an error in the operation of the DHCPv4 server when, after it was turned off/on, the server did not respond to DHCP Discover;
Fixed an error in the ping diagnostic service. When specifying the domain name in the ipv4 field, and not the ipv4 address, ipv6 ping was performed;
Fixed a bug in the LANDevice parameters.1.LANEthernetInterfaceConfig for the SNR AX2 model. The changed values were accepted, but incorrect values were returned when reading the parameters;
Fixed a VPN interface configuration error when, when configuring the PPTP/L2TP interface, after changing the VPN type to PPPoE, the interface did not rise and the default route was built via WAN;
Fixed a bug when on SNR-CPE W4N (rev. N) the checkbox for enabling Band Steering was displayed;
Fixed errors in the operation of multicast traffic when the router is simultaneously loaded by other clients with devices connected in neighboring LAN ports with 100 Mbit/s agreement.
Fixed an error that leads to switching the 5 GHz interface to MCS0 with an active multicast stream and additional traffic load.
Section
border
true
EasyWRT 2.4.5
Status
subtle
true
colour
Blue
title
hotfix
Status
colour
Blue
title
latest
Column
width
15
РУС
Expand
Исправления
Исправлена ошибка отображения подключенных LAN клиентов в арендах DHCP
Column
width
20
ENG
Expand
title
Сlick here to expand...
Fixes
Fixed issue with displaying connected LAN clients in DHCP leases