Исправлена проверка контрольной суммы при обновлении прошивки
Исправлены ошибки в bandsteering, вызванные одновременным включением bandsteering и активацией mesh. Повышена стабильность
EasyWRT 2.4.2 (Hotfix)
Click here to expand...
Исправления
Мелкие исправления в работе Mesh и сервиса автоматического обновления ПО
EasyWRT 2.4.1 (Hotfix)
Click here to expand...
Исправления
Исправлена ошибка, которая приводила к сбою элементов WEB UI
EasyWRT 2.4.0
Click here to expand...
Новое
Добавлена функция Failover для модели SNR LTE - Документация
Добавлена функция объединения сетей и поддержка управления диапазоном (Band Steering) - Документация
Сервис централизованного обновления сети в Mesh - Документация
Для операторов связи реализована система быстрой кастомизации ПО - "EasyCustom". Для получения подробной консультации и документации обратитесь к вашему менеджеру;
В меню настроек VLAN добавлена поддержка 802.1p (кроме моделей W4N, MD2):
Улучшения
Добавлено отображение поддержки 802.11k/v/r со стороны клиента в списке активных подключений:
Скорректировали логику поведения Mesh-агента при подключении к контроллеру:Клиенты подключенные к Mesh-агенту в процессе подключения к контроллеру будут отключены от роутера;
Скорректировали механизм активации режима Mesh-агента: Если в течении двух минут соединение агента с контроллером не было установлено, то режим агента на маршрутизаторе будет отключен;
Скорректирована функция определения типа подключения клиента в арендах DHCP;
Добавлена возможность записи и хранения системного журнала в ПЗУ:
Добавлена возможность отключения LAN интерфейсов из WEB UI;
Скорректированы параметры конфигурации igmpproxy в ситуациях когда WAN-порт переназначен на LAN
Скорректированы параметры валидации полей для настройки сети режима AP-Cli (Wi-Fi повторитель). Теперь можно выбирать сети содержащие пробелы, Кириллицу и др. символы)
Исправления
Исправлена ошибка в WPS возникающая при отключении интерфейса 5ГГц
EasyWRT 2.2.1 (Hotfix)
Click here to expand...
Новое
Для внутренних целей добавлен новый MAC OUI (8C:AE:DB)
Улучшения
Исключена перезапись параметров (oui, serial_number, software_version, hardware_version) при восстановлении конфигурации из архива через CMWP
EasyWRT 2.2.0
Click here to expand...
Новое
Добавлена поддержка режимов AP-Client/Repeater. Описание режимов работы доступно по ссылке
Добавлена возможность переназначения WAN интерфейса на один из LAN портов маршрутизатора
Улучшения
Скорректирована логика отправки Bootstrap/Boot event событий в CWMP
Скорректирован Inform пакет в CWMP, теперь содержит параметр ModelName
Checksum verification has been fixed during firmware update.
Errors in bandsteering caused by simultaneous activation of bandsteering and mesh have been fixed. Stability has been improved
EasyWRT 2.4.2 (Hotfix)
Сlick here to expand...
Fixes
Minor fixes in Mesh operation and software update service
EasyWRT 2.4.1 (Hotfix)
Сlick here to expand...
Fixes
Fixed a bug that caused WEB UI elements to crash
EasyWRT 2.4.0
Сlick here to expand...
New
Added Failover function for the SNR LTE model - Documentation
Added network aggregation function and support for band steering - Documentation
Centralized network update service enabled in Mesh - Documentation
A system for quick software customization - "EasyCustom" - has been implemented for telecom operators. For detailed advice and documentation, contact your manager;
Added support for 802.1p to the VLAN settings menu (except W4N, MD2 models)
Improvements
Added display of 802.11k/v/r support on the client side in the list of active connections
Adjusted the logic of the Mesh agent’s behavior when connecting to the controller:Clients connected to the Mesh agent will be disconnected from the router while connecting to the controller;
The mechanism for activating the Mesh agent mode has been adjusted: If within two minutes the connection between the agent and the controller has not been established, then the agent mode on the router will be disabled;
The function of determining the client connection type in DHCP leases has been adjusted;
Added the ability to record and store the system log in ROM (not recommended unless absolutely necessary):
Added the ability to disable LAN interfaces from WEB UI;
Expanded set of parameters for cwmp (TR-069/098): - AssociatedDevice.{i}. - LANEthernetInterfaceConfig.{i}.Stats. - InternetGatewayDevice.Services.SSHRemoteManagement. - InternetGatewayDevice.Services.WebRemoteManagement. - InternetGatewayDevice.Layer3Forwarding.Forwarding. - WANPPPConnection.{i}.X_SNR_ConnectionInitializationTime. - WANIPConnection.{i}.X_SNR_ConnectionInitializationTime. - InternetGatewayDevice.TraceRouteDiagnostics.RouteHops. - InternetGatewayDevice.DownloadDiagnostics.
The UDP-proxy management page has been simplified, connection statistics have been displayed:
Reworked the page for managing guest networks. The choice of interfaces has become clearer:
Improved detection of Mesh connection status on the controller.
Fixes
Drivers have been updated (fixed errors in processing beacon frame, internal services, WPA3, vulnerabilities in WPS have been closed);
Fixed an error in launching the switch utility for W4N, MD2 models;
Fixed password handler for AP-Cli / Router modes;
Fixed the function displaying connected clients to the Mesh controller/agent via ethernet;
Fixed automatic channel selection;
Errors in Mesh and its components have been fixed, stability has been improved;
Fixed minor errors in generating configuration archive;
Fixed errors in creating MBSSID for new router models;
Fixed errors in ALG operation for PPTP/RTSP/FTP, etc.;
Minor fixes in WEB UI.
EasyWRT 2.3.2 (Hotfix)
Сlick here to expand...
Fixes
Fixed non-working disable option for igmpproxy
Fixed an incorrectly working switch for running auto software updates
Fixed the problem with assigning a zeroconf IP address during reboots
EasyWRT 2.3.1 (Hotfix)
Сlick here to expand...
Fixes
Minor fixes when creating routes in a dual access configuration (WAN+VPN)
Fixed time format on the access control page
Improvements
The kernel log now displays highlighting (in CLI) and logging time
EasyWRT 2.3.0
Сlick here to expand...
New
Added control of access restrictions to the router from the WAN side by subnets (Menu - System - Management)
Added loop detection function for ME2-Lite, AX1, AX2 models (Menu - Services - Miscellaneous)
Added protection functions against brute force attacks in WEB UI/SSH (enabled by default)
Added output of session list for UDP-proxy
Added support for tr-069 stun
Added AC and Service Name parameters for PPPoE
Improvements
An extended set of parameters (including port forwarding) is transferred during migration from SNR-CPE firmware to EasyWRT. The full list of parameters is available here: https://nag.wiki/label/DOC/upgrade-to-easywrt.
Adjusted service of automatic software updates (relevant for very slow tariffs)
Corrected the logic of HWNAT management (AX1, ME2-Lite)
Corrected the logic of switching WPS modes
Adjusted behavior of igmpproxy when changing WAN
Corrected the logic of sending TransferComplete in cwmp after Download is completed
The boguspriv option is disabled by default (by popular demand)
The rfc1918_filter option is disabled by default (by popular demand)
Fixes
Errors in Ap-Cli modes with open encryption have been fixed
Some errors in Mesh (p1905) have been fixed, stability has been improved
Errors in WEB UI for various services have been fixed
Adjusted igmpproxy configuration parameters in situations where the WAN port is reassigned to LAN
Adjusted field validation parameters for setting up the network in AP-Cli mode (Wi-Fi repeater). Now you can choose networks containing spaces, Cyrillic, and other symbols)
Fixes
Fixed an error in WPS that occurs when the 5GHz interface is disabled
EasyWRT 2.2.1 (Hotfix)
Сlick here to expand...
New
For internal purposes, a new MAC OUI (8C:AE:DB) has been added.
Improvements
Overwriting parameters (oui, serial_number, software_version, hardware_version) is excluded when restoring configuration from the archive via CMWP.
EasyWRT 2.2.0
Сlick here to expand...
New
Added support for AP-Client/Repeater modes.
Added the ability to reassign the WAN interface to one of the LAN ports of the router
Improvements
Adjusted the logic of sending Bootstrap/Boot event events in CWMP
Adjusted the Inform packet in CWMP, now containing the ModelName parameter